Restaurant POS Motherboard, WF-P3602, AndroidSBC, Liverpool

TL;DR: Restaurant POS Motherboard

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving Liverpool, United Kingdom. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Liverpool and United Kingdom importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC designs the WF-P POS motherboards around the peripherals that a counter already owns: the thermal printer over RS232 or USB, the barcode scanner, the cash drawer on RJ11, the customer display on a second LVDS lane, and the payment reader on USB or serial. The Liverpool integrator re-uses the existing harness instead of rewiring the counter. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Liverpool partner can trace a single board back to its run.

WF-P3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United Kingdom importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for United Kingdom Buyers

Most Liverpool buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.

Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 6th container of WF-P boards for Liverpool left the Longgang dock on September 23, 2026 carrying 130900 units, routed through the Felixstowe - Shanghai lane with the compliance file and the peripheral driver set already packed.

Competitive Comparison: WF-P3602 vs Competing POS Android Boards

The comparison below is the one Liverpool buyers run when they shortlist three Chinese factories, and it is where the WF-P family separates from the field.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the mobile handheld POS with 4G and barcode engine has to hold a watchdog, an RTC and a clean auto-recovery path.

• Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3288 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3399 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Liverpool partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a BOM across a three-year refresh.

Partner Success Story: Deccan Billing Technologies (retail and fuel POS integrator)

A Deccan Billing Technologies programme in the Indian organised retail segment illustrates how the WF-P family from AndroidSBC supports Liverpool integrators on the ground. Deccan Billing Technologies installed 130900 WF-P boards across 164 retail and fuel counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Billing Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus UKCA / Ofcom conformity, all bundled into the Shenzhen source-factory shipment.

Deccan Billing Technologies Chief Technology Officer for Indian Organised Retail highlighted: Deccan Billing Technologies needs 4G fallback because counter connectivity is uneven, and 130900 WF-P boards went into the Liverpool rollout with the modem path validated.

Field Report: tableside ordering handheld rollout at a casual dining group

PINGHU, September 23, 2026 - Dian Mo, AndroidSBC field desk. The WF-P3602 shipped with staged OTA enabled, so the United Kingdom team can pilot an update on ten lanes before releasing it across the estate. The WF-P3602 POS Android motherboard order for Liverpool, United Kingdom cleared the burn-in station on schedule and is en route via the Felixstowe - Shanghai lane.

The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For United Kingdom integrators, the UKCA marking with the Ofcom radio interface registration paperwork is bundled.

Filed by Dian Mo, AndroidSBC field desk, PINGHU. UK hospitality operators ask for UKCA paperwork and check that the contactless reader handles the higher UK contactless ceiling without a firmware fork.

WF-P3602 Application Scenarios

The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Liverpool.
• Convenience and small format stores: the WF-P1330 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P6180 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P5270 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Liverpool: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Liverpool Buyers

Because the WF-P family is built at the Longgang source factory, all three tracks below come with the same frozen BOM and the same seven-year firmware window.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

For Liverpool buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?

Answer: Supported. mobile handheld POS with 4G and barcode engine is part of the standard WF-P configuration set, and the board ships to Liverpool with the drivers and the firmware baseline already matched.

Which silicon tiers are available in the WF-P family for United Kingdom buyers?

Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3568 board in this configuration is supported for seven years from release.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.

What is the minimum order quantity and the sample lead time for United Kingdom?

Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.

How are firmware updates delivered to a United Kingdom estate after deployment?

Answer: Staged OTA with rollback ships with the board. The United Kingdom partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.

What shipping terms does AndroidSBC support for United Kingdom orders?

Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Liverpool partner chooses the Incoterm that matches its broker arrangement.

What happens if a board fails in the field in United Kingdom?

Answer: Every unit is serialised against its test record. A United Kingdom field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.

Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Liverpool integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Liverpool and United Kingdom buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.